Tilted Base Set for Eureka Mignon
A tilted base set for the Eureka Mignon: a tilted base, a catch tray, an adjustable cup riser and a dosing cup in your basket size. The grinder leans 14° forward, so the chute points into the cup, and the riser lifts the cup up to 15 mm. Matte black PLA, magnets sealed inside.
- Support in English and six more languages
-
Designed and made by
Black Tamp · all 43 products
The grinder leans forward, the cup sits under the chute
This Eureka Mignon tilted base set has four parts: a tilted base, a catch tray, an adjustable cup riser and a dosing cup. The grinder drops into a pocket shaped to its own base and leans 14° forward, so the chute points down into the cup.
Twist the upper ring of the riser and the cup rises up to 15 mm, right under the chute. Marks at +5, +10 and +15 show the height.
Magnets sealed inside hold the parts together: the tray to the base, the riser to the tray and the cup to the riser.
How it fits
The set is designed to fit the Eureka Mignon with no tools and no modification to the grinder. The grinder stands in the shaped seat of the base, and the power switch on its side stays clear.
A 3 mm rim on the catch tray keeps stray grounds off the counter. It lifts off the base for cleaning.
Choose the right size
The dosing cup comes in six sizes to match your portafilter basket: 49, 51, 53, 54, 57 or 58 mm. 58 mm is selected by default. The base, the catch tray and the Ø58 mm riser are the same for every size.
Materials and care
Every part is 3D printed in matte black PLA, and like any 3D printed part it shows fine layer lines on its surface. The magnets are sealed in during the print, so nothing is glued and nothing can fall out.
PLA softens with heat, so wash the parts by hand in lukewarm water with mild dish soap and keep them out of the dishwasher.
What's in the box
- 1 × tilted base
- 1 × catch tray
- 1 × adjustable cup riser
- 1 × dosing cup in the basket size you choose
The grinder and anything else shown in the photos are not included.
Fits these machines
Every tool size by machineSpecifications
Sizes and fit
- Fits
- Eureka Mignon grinders
Build
- Tilted base
- 124.4 × 139.5 mm, 14° seat shaped to the grinder's base
- Material
- Matte black PLA, 3D printed
Extras
- Catch tray
- 124.2 × 109.8 × 9.2 mm, 3 mm rim, lifts off
- Cup riser
- Ø58 mm, travel 0–15 mm, marks at +5, +10 and +15
- Dosing cup
- 49, 51, 53, 54, 57 or 58 mm (58 mm by default)
- Magnets
- Sealed inside: tray to base, riser to tray, cup to riser
- Fitting
- No tools, no modification to the grinder
- Care
- Hand wash in lukewarm water with mild dish soap, not dishwasher safe
- Brand
- Black Tamp
Black Tamp
Designed and made by us · 43 products
Reviews
No reviews yet. Be the first to write one.
Write the first review
Goes well with
You might also need
Recently viewed
$34.00
Write the first review