Stand with Drawer for Fellow Stagg EKG

A stand with a drawer for the Fellow Stagg EKG and EKG Pro. The kettle base sits on top and a drawer on side rails slides out underneath. The Standard drawer takes a Fellow Tally Pro scale; the lower Light version keeps filters, a brush or a compact scale. Matte black PLA.

Support in English and six more languages
Designed and made by Black Tamp · all 57 products

A stand and a drawer for your Stagg kettle

This stand lifts the Fellow Stagg EKG or EKG Pro off the counter and adds a drawer underneath. The kettle base sits on top and works as usual. The drawer keeps your pour-over things in one place: a scale, filters or a brush.

Drawer on rails

The drawer runs on rails along both sides and stays level when you pull it out. A V-shaped notch in the drawer front gives your fingers a grip, and the Black Tamp logo sits below it.

Standard: room for the Tally Pro

The Standard drawer is 179 mm deep and 163.9 mm wide inside, with 42 mm of height. The Fellow Tally Pro scale (177 × 150 × 33 mm) slides in and out with a little room to spare, and low ribs inside keep it centred.

On top, the Stagg base drops into a 20 mm deep pocket, so the kettle cannot slide off. The cable leaves through a slot at the back.

Light: low and compact

The Light version is only 52.5 mm tall on a 171 × 171 mm footprint. Its top frame carries the kettle base. The drawer is 155.2 × 159.5 mm inside and 38 mm high: room for filters, a brush or a compact scale.

Questions before you buy

Which version fits the Fellow Tally Pro? The Standard. The Light drawer is too small for it.
Does the kettle base still work? Yes. It sits on top and works as usual.

Choose the right size

Standard: 182.7 × 187.2 × 71.3 mm. Drawer inside 163.9 × 179.0 mm, 42 mm high. Fits the Fellow Tally Pro. This version is selected by default.
Light: 171 × 171 × 52.5 mm. Drawer inside 155.2 × 159.5 mm, 38 mm high.

The Fellow Tally Pro (177 × 150 mm) does not fit the Light drawer; the Standard version is made for it. If you want to keep another scale in the drawer, measure it before you choose.

How to use it

Set the stand on a flat, dry counter, with the drawer at the front.
Place the Stagg base on top. On the Standard, it drops into the pocket; lead the cable out through the slot at the back.
Put the kettle on its base as usual.
Pull the drawer out by the notch in its front, and push it back in when you are done.

Materials and care

The stand is 3D printed in matte black PLA, in three parts: base, top and drawer. On the Standard, the joint between base and top shows as a fine line. Like any 3D printed part, it shows fine layer lines on the surface. Wipe it with a damp cloth. It is not dishwasher safe.

What's in the box

1 × base
1 × top (Standard) or top frame (Light)
1 × drawer

The kettle, the kettle base, the scale and anything else shown in the photos are not included.

Fellow, Stagg and Tally are trademarks of their owner; we name them only to say what the stand fits.

Specifications

Sizes and fit

Fits: Fellow Stagg EKG and Stagg EKG Pro base
Size (W × D × H): Standard: 182.7 × 187.2 × 71.3 mm; Light: 171 × 171 × 52.5 mm

Build

Versions: Standard (default), Light
Material: Matte black PLA, 3D printed, three parts

Extras

Drawer inside: Standard: 163.9 × 179.0 mm, 42 mm high; Light: 155.2 × 159.5 mm, 38 mm high
Scale: Standard fits the Fellow Tally Pro (177 × 150 × 33 mm); Light does not
Drawer: Runs on side rails, V finger notch, Black Tamp logo on the front
Care: Wipe with a damp cloth, not dishwasher safe
Brand: Black Tamp