Single Dose Set for Eureka Mignon
A single dose set for the Eureka Mignon with three of our parts: the Single Dose Hopper, the Grind Setting Dial and the Tilted Base Set with its catch tray, cup riser and dosing cup. All in matte black PLA, designed to fit with no modification to the grinder.
- Support in English and six more languages
-
Designed and made by
Black Tamp · all 43 products
Three parts for single dosing on the Eureka Mignon
This Eureka Mignon single dose kit brings together three parts we make for the grinder: the Single Dose Hopper on top, the Grind Setting Dial around it and the Tilted Base Set underneath. All three fit on one grinder at the same time.
What is in the set
- Single Dose Hopper: holds about 64 g of beans, feeds them down to the burrs through a 30° funnel and drops into the grinder's own hopper seat; a flush lid closes it.
- Grind Setting Dial: a geared knob turns a ring with 100 marks per turn, read at a fixed index line, so you can note a grind setting and go back to it.
- Tilted Base Set: the grinder leans 14° forward in a fitted seat, so the chute points into the dosing cup; a twist-up riser lifts the cup up to 15 mm and a catch tray holds stray grounds.
How it fits
Each part is designed to fit the Eureka Mignon with no modification to the grinder. The hopper and the base go on with no tools. The dial mounts on the grinder's original boss and knob shaft with the machine's own screw. Magnets sealed inside hold the tray to the base, the riser to the tray and the cup to the riser.
Choose the right size
The dosing cup comes in six sizes to match your portafilter basket: 49, 51, 53, 54, 57 or 58 mm. 58 mm is selected by default. The hopper, the dial, the base, the catch tray and the Ø58 mm riser are the same for every size.
Materials and care
Every part is 3D printed in matte black PLA, and like any 3D printed part it shows fine layer lines on its surface. The dial's figures are white PLA inlaid in the ring. The magnets are sealed in during the print, so nothing is glued and nothing can fall out.
PLA softens with heat, so wash the parts by hand in lukewarm water with mild dish soap and keep them out of the dishwasher.
What's in the box
- 1 × single dose hopper with its lid
- 1 × grind setting dial: base plate, ring, bezel and knob
- 1 × tilted base
- 1 × catch tray
- 1 × adjustable cup riser
- 1 × dosing cup in the basket size you choose
The grinder, the portafilter and anything else shown in the photos are not included.
Fits these machines
Every tool size by machineSpecifications
Sizes and fit
- Fits
- Eureka Mignon grinders
Build
- Tilted base
- 124.4 × 139.5 mm, 14° seat
- Material
- Matte black PLA, dial figures in white PLA, 3D printed
Extras
- Hopper
- Body Ø69 × 87.8 mm, lid Ø69 × 11.9 mm, 168 cm³ (about 64 g of beans)
- Dial
- Ring Ø113.8 mm with 100 marks per turn, knob Ø37 mm, geared 25:85
- Catch tray
- 124.2 × 109.8 × 9.2 mm, 3 mm rim
- Cup riser
- Ø58 mm, travel 0–15 mm
- Dosing cup
- 49, 51, 53, 54, 57 or 58 mm (58 mm by default)
- Fitting
- No modification; the dial uses the grinder's own screw
- Care
- Hand wash in lukewarm water with mild dish soap, not dishwasher safe
- Brand
- Black Tamp
Black Tamp
Designed and made by us · 43 products
Reviews
No reviews yet. Be the first to write one.
Write the first review
Goes well with
You might also need
Recently viewed
$55.00
Write the first review