Extended Low Profile Drip Tray for Gaggia Classic
An extended low profile drip tray for the Gaggia Classic Pro, Evo, E24 and RI9403. At 173.5 mm deep it reaches out in front of the machine, two plug-in feet carry the part that stands out, and a separate cover plate fits into the front. 26 mm tall, black ABS, with the machine's own grate on top.
- Support in English and six more languages
Black Tamp
Designed and made by us · 43 products
A low tray that reaches out in front of the machine
This Gaggia Classic extended drip tray replaces the original tray on the Gaggia Classic Pro, Evo, E24 and RI9403. It is 173.5 mm deep instead of the short tray's 129 mm, so it reaches out in front of the machine. It is 26 mm tall and holds a generous amount of water.
Two Ø16 mm feet plug into holes under the front and carry the part that stands out. A separate cover plate fits into the front of the tray.
The machine's own stainless grate goes on top.
How it fits
Plug the two feet into the holes under the front, take the machine's tray out and set this one in its place. Then put the original grate on top. It needs no tools and no modification to the machine.
Materials and care
The tray, the front cover and the feet are 3D printed in black ABS, and like any 3D printed part they show fine layer lines on their surface.
Wash them by hand in lukewarm water with mild dish soap.
What's in the box
- 1 × extended low profile drip tray
- 1 × front cover
- 2 × feet, Ø16 mm
The grate is the one from your machine and is not included. Neither are the machine, the cups or anything else shown in the photos; the Long Vent Tube for Gaggia Classic in them is sold separately.
Fits these machines
Specifications
Sizes and fit
- Fits
- Gaggia Classic Pro, Gaggia Classic Evo, Gaggia Classic E24, Gaggia Classic RI9403
Build
- Material
- Black ABS, 3D printed
Extras
- Tray
- 195.2 × 173.5 × 26.0 mm
- Front cover
- 184.5 × 48.0 × 3.0 mm, fits into the front of the tray
- Feet
- 2 × Ø16 mm, plug into holes under the front
- Grate
- The machine's own stainless grate (not included)
- Fitting
- No tools, no modification to the machine
- Care
- Hand wash in lukewarm water with mild dish soap
- Brand
- Black Tamp
Reviews
No reviews yet. Be the first to write one.
Write the first review
Goes well with
More for Gaggia Classic
Everything for Gaggia Classic
You might also need
-
IKAPE Adjustable-Pressure Spring Tamper (51 to 58.5 mm)
51/53.3/58.5 mm
$39.99
-
IKAPE Convex Basket, Black Ceramic (54 / 58 mm to 32 mm)
54/58 mm
$59.99
-
IKAPE V3 Walnut-Handle Tamper, Black Base (51 to 58.35 mm)
51/53.3/58.35 mm
$48.99
-
IKAPE Double-Bearing Espresso Distributor (51 to 58.35 mm)
51/53.3/58.35 mm
$49.99
Recently viewed
$42.00
Write the first review