Stainless Steel Portafilter Wall Holder

A portafilter wall holder in 1.5 mm satin stainless steel, single for one portafilter or double for two. It takes most portafilters up to 36 mm deep, including La Pavoni, Gaggia and E61; each rests basket face out, handle down. Fixes to the backsplash with double-sided foam tape.

Support in English and six more languages
Designed and made by Black Tamp · all 43 products

Portafilters on the wall

This portafilter wall holder hangs your portafilter on the wall. It takes most portafilters up to 36 mm deep and has been tested with La Pavoni, Gaggia and E61 portafilters. The portafilter rests on the shelf with the basket face out, and the handle points down through a gap in the front.

The back plate, the shelf and the front tabs are bent from one 1.5 mm sheet of satin stainless steel.

Choose the right size

Single: for one portafilter, 72.7 mm wide, two front tabs and one 30 mm gap for the handle.
Double: for two portafilters, 145.9 mm wide, three front tabs and a 23.9 mm gap for each handle.

Both versions are 74.4 mm high and 40.6 mm deep.

How to use it

The holder fixes to the backsplash with double-sided foam tape. The back plate also has one Ø4.7 mm hole on the single version and two on the double.

Materials and care

The holder is 1.5 mm stainless steel with a satin finish. Wash it by hand and dry it after washing.

What's in the box

1 × portafilter wall holder, single or double
Double-sided foam tape

The portafilters and anything else shown in the photos are not included.

Specifications

Sizes and fit

Fits: Most portafilters up to 36 mm deep; tested with La Pavoni, Gaggia and E61
Size, single: 72.7 wide × 74.4 high × 40.6 deep mm
Size, double: 145.9 wide × 74.4 high × 40.6 deep mm

Build