Stainless Steel Extended Top Cover for Gaggia Classic
An extended top cover in 0.8 mm 304 stainless steel for the Gaggia Classic Pro, Evo, E24, RI9403 and other Gaggia Classic models built like the one in the photos. One flat plate covers the whole top, cups of any size fit on it, and a cup guard at the back keeps them from sliding off. Satin or bright finish.
- Support in English and six more languages
-
Designed and made by
Black Tamp · all 43 products
One steel top for the whole machine
This Gaggia Classic top cover is one flat stainless plate, 194 × 234 mm, over the full top of the machine. It replaces the original top plate and the black plastic lid. It fits the Gaggia Classic Pro, Evo, E24 and RI9403, and other Gaggia Classic models built like the machine shown in the photos.
The cover stays within the machine's outline and does not stick out past it. The top becomes one larger, flat surface, and cups of any size fit on it.
There is no plastic fill section any more, and the top is closed; to fill the water tank, pull the tank out of the machine.
Cup guard at the back
Along the back edge a 135 mm strip is bent up about 11 mm, so cups can't slide off the back of the machine.
Satin or bright
The same part comes in two finishes at the same price: satin (brushed) or bright (mirror-polished).
How it fits
Remove the two screws at the back of the original top with a Phillips screwdriver, lift the top off and fix the extended cover in its place with the machine's original screws.
The two wires that were connected to the original top cover are fitted at the two rear screw points with the cable adapters in the box.
Materials and care
The cover is laser-cut and bent from 0.8 mm AISI 304 stainless steel, satin-brushed or mirror-polished.
We make each cover ourselves and finish it by hand, so small surface marks and slight differences in finish can occur. Wash it by hand.
What's in the box
- 1 × extended top cover
- Cable adapters for the two wires
The machine, its screws, cups, the screwdriver and anything else shown in the photos are not included.
Fits these machines
Specifications
Sizes and fit
- Fits
- Gaggia Classic Pro, Gaggia Classic Evo, Gaggia Classic E24, Gaggia Classic RI9403, and other Gaggia Classic models built like the machine shown in the photos
- Size
- 194 × 234 mm, 0.8 mm sheet
Build
- Material
- AISI 304 stainless steel, 0.8 mm, laser-cut and bent
- Finish
- Satin (brushed) or bright (mirror)
Extras
- Replaces
- The machine's whole top: the original top plate and the black lid (the plastic water-filling part)
- Cup guard
- 135 mm wide, bent up about 11 mm, at the back edge
- Top
- Closed and flat, no filling opening; does not stick out past the machine
- Fitting
- The machine's original screws at the back, Phillips screwdriver; the two wires go to the two rear screw points with the cable adapters
- Care
- Hand wash
- Brand
- Black Tamp
Black Tamp
Designed and made by us · 43 products
Reviews
No reviews yet. Be the first to write one.
Write the first review
Goes well with
More for Gaggia Classic
Everything for Gaggia Classic
You might also need
-
IKAPE 3-in-1 Shabili Wood Tamper Station (51 / 54 and 58 mm)
51/54/58 mm
$59.99
-
IKAPE V3 Calibrated Tamper, All Black (51 to 58.35 mm)
51/53.3/58.35 mm
$48.99
-
IKAPE Variable Diameter Espresso Basket (54 / 58 mm to 32 mm)
54/58 mm
from
$15.99
-
IKAPE Gravity Distributor, All Black (51 to 58.35 mm)
51/53.3/58.35 mm
$45.99
Recently viewed
$47.00
Write the first review