
Dosing Funnel for De'Longhi Dedica
A dosing funnel for the 51 mm portafilter of the De'Longhi Dedica. Its Ø62.5 mm skirt goes over the portafilter and an inner shelf rests on the rim. Lockable: turn it on the lugs to lock. Plain: it lifts off without turning, made for use in our stand. 36 flutes, matte black PLA.
- Support in English and six more languages
-
Designed and made by
Black Tamp · all 43 products
A funnel that fits over the Dedica portafilter
This De'Longhi Dedica dosing funnel sits on the 51 mm portafilter of the Dedica while you dose into it. Its Ø62.5 mm skirt goes over the portafilter, and an inner shelf rests on the portafilter's rim.
The outside has 36 vertical flutes, the same family as our portafilter stands.
Lockable or plain
- Lockable: three L-slots take the portafilter lugs. Put the funnel on and turn it to lock. Ø73.3 × 30.9 mm.
- Plain: three straight notches clear the lugs, so the funnel lifts off without turning. It is made for use in a stand: this is the one to use with our Portafilter Stand for De'Longhi Dedica. Ø73.3 × 27.3 mm.
How to use it
Put the funnel over the portafilter with the lugs in its slots or notches. Turn the lockable one to lock it; lift the plain one straight off. It needs no tools.
Materials and care
The funnel is 3D printed in matte black PLA, and like any 3D printed part it shows fine layer lines on its surface.
PLA softens with heat, so wash it by hand in lukewarm water with mild dish soap and keep it out of the dishwasher.
What's in the box
- 1 × dosing funnel, lockable or plain
The portafilter, the stand, the machine and anything else shown in the photos are not included.
Fits these machines
Specifications
Sizes and fit
- Fits
- 51 mm portafilter of the De'Longhi Dedica
Build
- Material
- Matte black PLA, 3D printed
- Version
- Lockable, Plain
Extras
- Skirt bore
- Ø62.5 mm, goes over the portafilter; inner shelf rests on its rim
- Lockable
- Three L-slots for the portafilter lugs, turn to lock; Ø73.3 × 30.9 mm
- Plain
- Three straight notches clear the lugs, lifts off without turning, made for use in a stand; Ø73.3 × 27.3 mm
- Outside
- 36 vertical flutes
- Fitting
- No tools
- Care
- Hand wash in lukewarm water with mild dish soap, not dishwasher safe
- Brand
- Black Tamp
Reviews
No reviews yet. Be the first to write one.
Write the first review
Goes well with
-
IKAPE V3 Springback Rotary WDT Tool (51 / 54 / 58 mm)
51/54/58 mm
$65.99
-
IKAPE One-Press WDT Tool, 14 Needles (51 / 54 / 58 mm)
51/54/58 mm
$89.99
-
IKAPE V3 Calibrated Spring Tamper (45.5–58.35 mm, Steel Base)
45.5–58.35 mm
$43.99
-
IKAPE V4 Palm Calibrated Tamper (51 to 58.5 mm)
51/53.3/58.5 mm
$55.99
More for De'Longhi Dedica
Everything for De'Longhi DedicaRecently viewed
$14.00

Write the first review